Details
An expansion kit for the HEATKILLER Multitop DDC pump top, with two 500mm M5 threaded rods, two slotted nuts, two washers and the wrench for the nuts. The Watercool HEATKILLER Multitop DDC Expansion Kit (31020) holds a stack of up to 8 pumps together; the MULTI-EXPANSION tops (31018) are not included in it.
Properties
- For
- HEATKILLER Multitop DDC with MULTI EXPANSION-TOP DDC (31018)
- Pieces
- 2 threaded rods, 2 washers, 2 slotted nuts, 1 wrench
- Size
- Rods M5, 500 mm long, shortened to fit
- Pumps
- Up to 8 at the same time
An individual, infinitely expandable top
The HEATKILLER MULTITOP DDC is completely modular and can therefore be easily and quickly expanded to include additional pumps. The Multitop X2 and X3 grow with two articles: one HEATKILLER MULTI EXPANSION-TOP DDC per added pump, plus this kit. In addition to those, the additional pumps are of course also required, each a Laing DDC or one of the same type from our DDC pumps.
What the kit holds
This kit includes all the necessary assembly materials to operate up to 8 pumps. Its scope of delivery has two rods, and these must be shortened to individual lengths for your stack with a fine hacksaw. Each rod screws carefully into the internal thread of the Multitop and is fixed with a slotted nut on the opposite side. The tool for those nuts is in the box.
In the box
- 2x 500mm threaded rod M5
- 2x U-washer
- 2x slotted nut M5
- 1x screwdriver for slotted nuts
Watercool's assembly instructions cover the whole HEATKILLER DDC Multitop series, with the steps for cutting the rods and mounting an expansion top.
