Details
The Stealkey Customs SC DisPro 240 MO-RA is a 240 mm distroplate built as the hub between the CPU and GPU blocks inside the case and an external radiator such as the Watercool MO-RA. The CNC-milled acrylic plate combines a reservoir with dedicated channels for each component, has 11x G1/4" ports and holds about 180 ml of coolant. It has no pump mount. Addressable D-RGB lighting behind a black anodized aluminum cover lights the acrylic.
Properties
- Type
- Distroplate with reservoir, no pump mount
- Size
- 240 x 120 x 33 mm
- Ports
- 11x G1/4"
- Volume
- approx. 180 ml
- Lighting
- D-RGB, 3-pin 5V
- Color
- Transparent acrylic, black aluminum cover
Built for an external radiator
The DisPro 240 MO-RA gathers the cooling of the CPU and the GPU in one plate inside the case and hands the heat to an external radiator, such as a MO-RA, outside it. The inside of the case stays clean, while the large radiator outside does the cooling work, without giving up control over the loop routing.
Port layout
Dual-zone routing keeps the internal hardware and the external radiator apart. Stealkey's recommended configuration puts the fill port at the top of the front, followed by the CPU outlet and inlet, the GPU outlet and the GPU inlet. Two ports at the bottom of the front lead to the external radiator: the radiator inlet and the radiator return, which doubles as the drain port. The back has two more ports for the external radiator connections. The port placement avoids complicated tube runs, and the integrated reservoir makes filling and bleeding the loop simpler.
No pump mount
Unlike the SC DisPro 240D and 240R, this distroplate has no integrated pump mount. Stealkey designed it as a purely passive manifold and reservoir, so the loop needs a pump that is mounted separately.
Mounting
The DisPro 240 MO-RA fits any case with a 120 mm fan mount. Its 120 mm fan hole pattern lets it sit on a standard 240 mm (2x 120 mm) fan position, and it is fixed with the included M4 x 6 mm screws. Do not overtighten the screws, or the acrylic can crack.
D-RGB lighting
The integrated addressable D-RGB lighting evenly lights the acrylic and the coolant. It connects to a 3-pin 5V ARGB header on the motherboard with a 500 mm cable, so the effects can be synced through the board maker's lighting software, such as ASUS Aura Sync or MSI Mystic Light.
Coolant and care
Clean the acrylic only with a microfiber cloth and never with alcohol-based cleaners or solvents, which damage the acrylic and cause stress cracks. Stealkey recommends rinsing the distroplate before installation to remove any last machining residues.
Technical data
| Model | SC DisPro 240 MO-RA (19006) |
| Type | Distroplate and reservoir, passive (no pump mount) |
| Dimensions (W x H x D) | 240 x 120 x 33 mm |
| Reservoir volume | approx. 180 ml (chamber and channels) |
| Ports | 11x G1/4" |
| Material | Acrylic, black anodized aluminum cover |
| Color | Transparent, black |
| D-RGB cable | 500 mm |
| D-RGB connector | 3-pin 5V ARGB |
| Mounting | M4 x 6 mm screws, 120 mm fan hole pattern |
| Made in | Germany, CNC-milled and hand-assembled |
Notes
- This distroplate has no pump mount; the pump is not part of it.
- Fits any case with a 120 mm fan mount.
- Close every unused port with one of the included G1/4 plugs.
- Leak-test the loop before you power the rest of the system; Stealkey says to test with no more than 0.5 bar.
In the box
- 1x Stealkey Customs SC DisPro 240 MO-RA Distroplate D-RGB
- 4x M4 mounting screws
- 5x G1/4 plugs
Stealkey's installation manual is a PDF.








