Fittings
Fittings are the bones of nearly all PC Watercooling builds. Available in popular sizes like 1/2"ID x 3/4"OD, 3/8"IDx1/2"OD and 3/8"IDx5/8"OD. All of our fittings feature G1/4" threads to ensure compatibility with nearly all aftermarket water cooling parts. We've got nearly every size of fitting and adapter that a PC modder could ask for. Compression fittings utilize a compression collar that effectivelty seals the tubing around the barb head to prevent leaks far more effectively than standard barb and clamp fittings. Adapter fittings can be used to redirect and repossition your fittings to help avoid making tight bends whith your tubing. We offer many other types of fittings such as valve fittings and quick disconnect fittings that make quickly removing and replacing internal water cooling components a breeze. Available from award winning brands like Alphacool, Phobya and Barrow; our fittings are designed to last for years of continuous use without leaking or failing!
-
Alphacool ES D-Plug 31.5mm G1/4 Male to Male Resizable Fitting - Chrome (17587)
The D-Plug from Alphacool's ENTERPRISE SOLUTIONS series with 2 G1/4" male threads offers the possibility to connect components like GPU and CPU coolers or radiators within a water circuit.Learn More$6.00 -
Alphacool G1/4 Check Valve - Chrome - BULK
*No Original Packaging, Each Fitting Individually Bagged*Learn MoreRegular Price: $4.00
Special Price $2.00
-
Phobya G1/4 Pressure Valve - Silver Nickel (71142)
A pressure relief valve for even more safety in your system! In common systems usually a standard reservoir suffices to level the occurring pressure differences. Also the parts installed in a system are usually pressure-tested up to at least 2 bar. But for users with seriously large cooling loops the extreme temperature differences between operation and standby may cause such high pressures that it is advisable to release the pressure to avoid damages. This pressure relief valve can, for example, easily be screwed into a T-piece and therefore be installed at any point of the cooling loop. Some reservoirs also offer additional openings which are usually equipped with plug caps.Learn More$6.25 -
Aquacomputer G1/4 Pressure Equalization Membrane - High Version (53138)
Pressure equalization membrane for top-side mounting in a reservoir. The membrane permits gas exchange between the cooling loop and the surrounding air, while preventing coolant from escaping. With this membrane, pressure changes caused by temperature variations can be equalized continuously. When installed, the membrane must always be positioned in the air bubble of the reservoir.Learn More$7.25 -
Alphacool G1/4" HF Stop / Plug Fitting - Chrome (17197)
Alphacools's fittings go new ways in looks, quality of manufacturing, colours and choice.Learn More$1.95 -
Alphacool Eiszapfen Screw Plug V.2 G1/4 - Chrome (17481)
With the patented flush stop fittings from Alphacool, the annoyance of protruding stop fittings is a thing of the past. They are not only extremely practical in small cases in which every millimetre counts, but also leave a strong visual impact.Learn More$3.50 -
Alphacool Eiszapfen G1/4" Stop Plug - Chrome (17253)
This screw plug fits in all ¼” openings. The screw thread is kept short and presents no danger of being screwed in too far.Learn More$2.95 -
Alphacool G1/4 16mm Knurled HardTube Compression Fitting - Chrome (17195)
This connector is used to connect a 16mm plexi tube with a 1/ 4” thread.Learn More$6.05 -
Alphacool Eiszapfen 16mm G1/4" HardTube Knurled Compression Fitting - Chrome (17265)
This connector has a ¼” external screw thread on one side. The other side fits HardTubes with an external diameter of 16mm.Learn More$7.99 -
Alphacool Eiszapfen PRO 16mm HardTube Fitting G1/4 - Chrome (17472)
The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known, previous Eiszapfen.Learn More$9.25
