Fittings
Fittings are the bones of nearly all PC Watercooling builds. Available in popular sizes like 1/2"ID x 3/4"OD, 3/8"IDx1/2"OD and 3/8"IDx5/8"OD. All of our fittings feature G1/4" threads to ensure compatibility with nearly all aftermarket water cooling parts. We've got nearly every size of fitting and adapter that a PC modder could ask for. Compression fittings utilize a compression collar that effectivelty seals the tubing around the barb head to prevent leaks far more effectively than standard barb and clamp fittings. Adapter fittings can be used to redirect and repossition your fittings to help avoid making tight bends whith your tubing. We offer many other types of fittings such as valve fittings and quick disconnect fittings that make quickly removing and replacing internal water cooling components a breeze. Available from award winning brands like Alphacool, Phobya and Barrow; our fittings are designed to last for years of continuous use without leaking or failing!
-
Phobya G1/4 Variable 3 Slot SLI/Crossfire VID Connection Fitting - Chrome (64035)
The variable SLI/CF connection piece connects two VGA water blocks which are installed in a Multi-GPU array.Learn More$7.25 -
Phobya G1/4 Pressure Valve - Silver Nickel (71142)
A pressure relief valve for even more safety in your system! In common systems usually a standard reservoir suffices to level the occurring pressure differences. Also the parts installed in a system are usually pressure-tested up to at least 2 bar. But for users with seriously large cooling loops the extreme temperature differences between operation and standby may cause such high pressures that it is advisable to release the pressure to avoid damages. This pressure relief valve can, for example, easily be screwed into a T-piece and therefore be installed at any point of the cooling loop. Some reservoirs also offer additional openings which are usually equipped with plug caps.Learn More$6.25 -
Koolance G1/4" Coolant Temperature Sensor Plug - Chrome (SEN-AP008G)
Learn MoreBare coolant sensor compatible with Koolance multi-sensor systems. Designed to fit any G 1/4 BSPP (parallel) thread fitting socket. Wire length = 30" (76cm).
NOTE: This sensor will only work with Koolance products which use 10K Ohm @25°C sensors (first introduced in 2011).
$10.99 -
Aquacomputer G1/4 Pressure Equalization Membrane - High Version (53138)
Pressure equalization membrane for top-side mounting in a reservoir. The membrane permits gas exchange between the cooling loop and the surrounding air, while preventing coolant from escaping. With this membrane, pressure changes caused by temperature variations can be equalized continuously. When installed, the membrane must always be positioned in the air bubble of the reservoir.Learn More$7.25 -
Alphacool Low Profile ES L-Connector Rotary G1/4 OT - G1/4 IT - Chrome (17584)
Learn MoreThe Low Profile ES L-connector from Alphacool's ENTERPRISE SOLUTIONS series with 1 G1/4" male thread and 1 G1/4" female thread offers the possibility to connect components like GPU and CPU coolers, reservoirs or radiators into a water circuit even in the tightest server case.
$9.75 -
Alphacool HT 16mm HardTube Compression Fitting G1/4 for Plexi or Brass Tubes - Knurled - Chrome - Six Pack (17384)
The Alphacool HT Compression fitting is a true masterpiece. These connectors promise absolute tightness and high quality.Learn More$29.75 -
Alphacool HT 16mm HardTube Compression Fitting 90° Elbow for Acrylic, Brass, Borosilicate or Carbon Tubes- Knurled - Chrome (17297)
New fitting from Alphacool for acrylic, brass, borosilicate (glass) or carbon tubes. Alphacool takes another step towards perfection and quality.Learn More$10.25 -
Alphacool HT 13mm HardTube Compression Fitting G1/4 for Plexi or Brass Tubes - Knurled - Chrome - Six Pack (17382)
The Alphacool HT Compression fitting is a true masterpiece. These connectors promise absolute tightness and high quality.Learn More$26.00 -
Alphacool HT 13mm HardTube Compression Fitting 90° Elbow for Acrylic, Brass, Borosilicate or Carbon Tubes- Knurled - Chrome (17295)
New fitting from Alphacool for acrylic, brass, borosilicate (glass) or carbon tubes. Alphacool takes another step towards perfection and quality.Learn More$7.10 -
Alphacool HF G1/4 3/8"ID x 5/8"OD Compression Fitting - Chrome - Six Pack (17388)
This connector can be used to connect 10/16mm tubing with a 1/4“ thread.Learn More$35.25
