Aquacomputer Modification Kit Mount Socket 2011/2066 for Cuplex Kryos (21581)

The Aquacomputer Modification Kit Mount Socket 2011/2066 for Cuplex Kryos (21581) is an Intel mounting set for CPU water blocks. It is intended for the rebuilding of an existing cuplex kryos Delrin, PRO, XT or HF to allow mounting on Socket 2011, 2011-3 and 2066 mainboards.

Properties

For

cuplex kryos Delrin/PRO/XT/HF

Sockets

2011, 2011-3, 2066

Pieces

2 mounting plates, 4 bolts, 4 hex nuts, 4 springs, 4 knurled nuts

Material

Stainless steel plates

What the rebuild involves

To achieve the conversion, the block's stainless steel mounting plates are replaced with the two in this set. A suitable screw kit is also included with the rebuilding kit: four threaded bolts M4x30, four M4 hexagonal nuts, four springs and four M4 knurled nuts.

Setting the contact pressure

Please note that this kit has no defined stop point available during mounting, so it gives no predefined contact pressure. When using it, the knurled nuts must be tightened by feeling until each spring is almost completely compressed. Only small gaps between adjacent spring coils should remain, and the coils must not touch each other.

What it fits

The kit goes on a block you already have; it is not a block itself. New Intel blocks are in our Intel CPU blocks section, among them the cuplex kryos NEXT RGBpx 2011 / 2011-3 / 2066 (21801).

In the box

• 2x Stainless steel mounting plates
• 4x Threaded bolts M4x30
• 4x hexagonal nuts M4
• 4x springs
• 4x Knurled nuts M4