Details
The Alphacool Eisrohr 13/10mm PETG 60cm - 4pcs is PETG hard tube in 13/10 mm (13 mm outer diameter). The pack holds four tubes of 60 cm each, 240 cm in all.
Properties
- Tube size
- 13/10 mm
- Length
- 60 cm per tube
- Material
- PETG
- Pieces in the pack
- 4
The HardTube Project
Alphacool describes its HardTube Project as becoming a reality, and says it is setting out on a new path and making great strides. Before now, the most common approach to water cooling was to use normal PVC tubes. Hard tube is the new way Alphacool is offering to configure your water cooling system. It says the HardTube variants bring more order into your system, which gives off a more structured impression. The newest in the range are the brass tubes, available in black chrome and chrome, as well as acrylic tubes, carbon, and borosilicate glass.
Bending and cutting
PETG tubes can be bent at lower temperatures than acrylic and are generally more flexible and easier to handle. Bent with the appropriate bending tools from our watercooling tools section, the PETG-tubes fit into any system easily, without needing any additional angled pieces. In order to install the tubes into the system, they need to be sawn to the correct length, for example with the Alphacool Pit Saw for Acryl/PETG Tubes.
What a run needs
A tube run takes two 13mm OD hard tube fittings, one at each end. With their fitted connectors and simply-designed functionality, Alphacool says the tubes can be connected to each other with an absolutely tight seal.
Notes
- Alphacool's note on application: use the tube only with clear, transparent water cooling fluids.
- Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses, which can also void the manufacturer's warranty.
In the box
- 4x Alphacool Eisrohr 13/10mm PETG 60cm
