USB Cables
Internal and external USB, and the adapters between them. Internal is the 9 pin USB 2.0 header and the 19 or 20 pin USB 3.0 header on the motherboard. External is Type-A and Type-C at the back panel. Water cooling controllers, pumps and displays almost always want the internal side.
Controller and display cables: Aquacomputer internal USB connection cables at 25cm and 100cm, including a 100cm run for VISION, an Aquaero internal cable at 100cm, and A plug to 5 pin cables at 200cm for reaching a rear panel port. Alphacool supplies a mini USB to 5 pin mainboard cable at 40cm.
Adapters: Aquacomputer USB 3.0 male to USB 2.0 male, for when the board has no free 9 pin header left and the 19 pin header is free.
Panel and hub: ModMyMods USB 3.0 20 pin to dual Type-A extensions with panel mounts, a DimasTech USB 3.0 bench support, and a GRAUGEAR 7 port USB 3.0 Type-A hub with a charging port, aluminum housing and per port switches.
Fan power off USB: Darkside 5V USB to dual fan adapters and USB mini transformer to 12V single and dual fan adapters, for running fans on a bench with no PSU header nearby.
