Details
An illuminated aRGB logo board for the front of the MO-RA IV 400 radiator. The Watercool MO-RA IV 400 Front Logo aRGB runs on +5 V through a 3-pin connector, and a MO-RA IV Active or Passive Control is required to use it.
Properties
- Compatible
- MO-RA IV 400
- Operating voltage
- +5 V
- Connector
- 3-pin (5VDG, 5V)
- Needs
- MO-RA IV Active or Passive Control
A lit logo on the radiator
Watercool says the illuminated logo makes the MO-RA IV look even more stylish. A high-quality aRGB board is pushed in behind the logo, fixed with magnets and connected to the Active or Passive Control. Thanks to the modular design, installation is easy.
The board is supported by all common mainboard manufacturers. This means that the MO-RA logo can be easily integrated into any lighting concept.
Mounting
Insert the LED board in the middle between the pipe bends, and rotate it by 90° only once it has reached its final position. It holds in place magnetically. Watercool's manual names a Torx TX20 as the tool and shows how the cable is routed.
Options
Watercool's technical data name the MO-RA IV 400 as the compatible radiator, and the scope of delivery adds the cable to the control. The matching light for the bottom of the same radiator is the MO-RA IV 400 Ambient Light aRGB (26440). The MO-RA IV 600 has its own Front Logo aRGB (26641). More parts are in our MO-RA IV Accessories category.
In the box
- 1x MO-RA IV Front Logo aRGB
- 1x connection cable for passive/active control
Watercool's assembly instructions cover the MO-RA IV series, with a page on the front logo LED and the dimensions of each size.
