Details
A 70 mm standpipe for the Multiport top of a HEATKILLER Tube reservoir, the shortest of three lengths, which fits the Tube 100, 150 and 200. The Watercool HEATKILLER® Tube - Spare Parts - Standpipe for Multiport 100 (30265) is made of Plexiglas XT.
Properties
- For
- HEATKILLER Tube 100, 150 and 200 reservoirs with a Multiport top
- Pieces
- 1 standpipe
- Size
- 70 mm long without thread
- Material
- Plexiglas XT
What the standpipe does
This spare part is for an expansion tank of the HEATKILLER Tube series with a multi-port lid. From the inside of the reservoir, the Plexiglas downpipe is screwed into the return pipe, the line that feeds back into the tank. Its open end then sits under the coolant, so the circuit is always closed.
That only works while the liquid level stays above the end of the downpipe. The length should therefore be selected so that its end is always below the coolant in your Heatkiller Tube. Watercool describes it as flexible in its application: it lets you use the inlets on the top, and it fits any reservoir with a G1/4 thread.
Compatibility
The standpipe for Multiport 100 is the one length that fits every size of the HEATKILLER Tube, for example the Tube 100 MP or the Tube 150 MP. Which standpipes go in which tank:
- HEATKILLER® Tube 100 reservoir: Standpipe for Multiport 100
- HEATKILLER® Tube 150 Expansion Tank: Standpipe for Multiport 100 or 150
- HEATKILLER® Tube 200 Expansion Tank: Standpipe for Multiport 100, 150 or 200
Technical data
| Material | Plexiglas XT |
| Length without thread | 70 mm |
In the box
- Watercool HEATKILLER® Tube - Spare Parts - Standpipe for Multiport 100
Watercool's assembly instructions cover the whole HEATKILLER Tube series, with opening the lid and taking the reservoir apart.
