Details
The Vetus ESD-15 is a pair of professional antistatic precision tweezers with curved, fine pointed tips. When you need to grab something tiny that is slightly farther away than your fingers can reach, these tweezers pick up and place small computer parts such as screws, jumpers, springs and connectors. The steel body has a black antistatic coating, and the bare steel tips are left uncoated.
Properties
- Type
- Antistatic precision tweezers
- Model
- Vetus ESD-15
- Tip
- Curved, fine pointed
- Body
- Steel, black antistatic coating
- Color
- Black
- Pieces in the pack
- 1
Grab the parts your fingers cannot
Small screws dropped into a case, a jumper on a crowded board or a fan cable that has to go through a tight gap are hard to reach by hand. A good pair of tweezers gets there and holds the part steady while you place it.
The curved fine point ESD-15
The curved points let you reach around an edge or under a cable and keep your hand out of the line of sight while you place a small part.
Antistatic coating
These are antistatic tweezers; the ESD in the model number stands for electrostatic discharge. The black coating on the body keeps your hand from touching the bare metal while you work near circuit boards and electronic parts.
Hard steel
The blister card is printed "HRC40 Selected" and describes the steel as "super hard, anti-magnetic, anti-acid steel". The model number and the Vetus name are printed on the side of the tweezers.
Three tip shapes
The Vetus ESD-12 has straight, fine pointed tips, the ESD-13 has straight, flat blunt tips and the ESD-15 has curved, fine pointed tips. All three have the same black coated body. This listing is the ESD-15.
Technical data
| Make | Vetus |
| Model | ESD-15 |
| Type | Antistatic precision tweezers |
| Tip | Curved, fine pointed |
| Material | Steel, anti-magnetic, anti-acid (card print) |
| Hardness | HRC40 (card print) |
| Finish | Black antistatic coating, bare steel tips |
| Color | Black |
In the box
- 1x Vetus Professional Antistatic Precision Tweezers
