Vetus Professional Antistatic Precision Tweezers (ESD-13)

The Vetus ESD-13 is a pair of professional antistatic precision tweezers with straight, flat blunt tips. When you need to grab something tiny that is slightly farther away than your fingers can reach, these tweezers pick up and place small computer parts such as screws, jumpers, springs and connectors. The steel body has a black antistatic coating, and the bare steel tips are left uncoated.

Properties

Type

Antistatic precision tweezers

Model

Vetus ESD-13

Tip

Straight, flat and blunt

Body

Steel, black antistatic coating

Color

Black

Pieces in the pack

1

Grab the parts your fingers cannot

Small screws dropped into a case, a jumper on a crowded board or a fan cable that has to go through a tight gap are hard to reach by hand. A good pair of tweezers gets there and holds the part steady while you place it.

The straight flat tip ESD-13

The flat, blunt tips grip a part over a wider surface, which holds flat items such as thermal pads, small labels, shims and SMD parts securely without poking into them.

Antistatic coating

These are antistatic tweezers; the ESD in the model number stands for electrostatic discharge. The black coating on the body keeps your hand from touching the bare metal while you work near circuit boards and electronic parts.

Hard steel

The blister card is printed "HRC40 Selected" and describes the steel as "super hard, anti-magnetic, anti-acid steel". The model number and the Vetus name are printed on the side of the tweezers.

Three tip shapes

The Vetus ESD-12 has straight, fine pointed tips, the ESD-13 has straight, flat blunt tips and the ESD-15 has curved, fine pointed tips. All three have the same black coated body. This listing is the ESD-13.

Technical data

In the box

• 1x Vetus Professional Antistatic Precision Tweezers