Details
The PCCooler RHS-03 is a set of 8 copper RAM heatsinks for the memory chips of a graphics card. Each heatsink measures 14 x 12 mm and is only 5.5 mm tall, with its top cut into a grid of small pins for a large cooling surface.
Properties
- Type
- VGA RAM heatsinks
- Size of each
- 14 x 12 mm, 5.5 mm tall
- Material
- Copper
- Weight of the set
- 35 g
- Pieces in the pack
- 8
Cooling for video memory
Graphics cards with bare memory chips, or a cooler that only covers the GPU, can run their memory hot. A small heatsink on each memory chip adds cooling surface and helps the chips shed heat into the airflow over the card.
Low and compact
At only 5.5 mm tall the heatsinks stay low on the card. Check the clearance under your GPU cooler or fan shroud before you fit them. The pin grid lets air reach the fins from any side.
Before you fit them
Clean each chip with isopropyl alcohol before fitting. A thermally conductive adhesive tape or thermal adhesive between heatsink and chip holds each heatsink in place. Make sure a heatsink does not touch a neighboring heatsink, component or contact.
Also in aluminum
PCCooler also makes the RHS-02, a set of 8 aluminum RAM heatsinks of 19 x 14 mm.
Technical data
| Model | RHS-03 |
| Brand | PCCooler |
| Dimensions of each heatsink | 14 mm x 12 mm x 5.5 mm |
| Material | Copper |
| Weight of the set | 35 g |
| Pieces | 8 |
In the box
- 8x PCCooler VGA Ram Heatsink Copper
