Details
The ModMyMods M4 x 6mm Hex Flat Head Countersink Screw - Black is an M4 flat head countersink screw with a hex socket, made of black-oxide alloy steel. It is 6 mm long overall with 3 mm of thread, and the 8 mm cone head sinks flush into a countersunk hole.
Properties
- Type
- Flat head countersink screw, hex socket
- Thread
- M4 x 0.7
- Total length
- 6 mm
- Thread length
- 3 mm
- Material
- Black-oxide alloy steel
- Color
- Black
- Pieces in the pack
- 1
Flush with the surface
The cone shaped head sits in a countersunk hole and ends level with the surface, so nothing sticks out on panels, brackets, acrylic parts or anything else that has to lie flat or slide past another part. The hole must be countersunk to match the head.
Hex socket drive
The hex socket takes a hex key, which grips the screw firmly, so the tool does not slip out and the head does not get chewed up when you tighten it. That makes clean work easy, even in tight spots. The socket takes a 2.5 mm hex key.
Check thread and depth first
Radiators and other parts use different threads (M3, M4 and 6-32 are the common ones) and different usable thread depths. Check what your part takes before you choose a size. On a radiator, a screw that is too long can reach the core and puncture a water channel, so always make sure the screw stops short of the fins.
Technical data
| Thread | M4 x 0.7 |
| Total length | 6 mm |
| Thread length | 3 mm |
| Head diameter | 8 mm |
| Drive | Hex socket, 2.5 mm hex key |
| Material | Black-oxide alloy steel |
| Color | Black |
Notes
- This listing is for one piece. Add the quantity you need to the cart.
- ModMyMods black hex flat head countersink screws come in M4 x 6 mm and M4 x 10 mm.
In the box
- 1x ModMyMods M4 x 6mm Hex Flat Head Countersink Screw - Black
