Details
The ModMyMods M4 x 11 Phillips Flat Screw - Black is a black M4 screw with a flat countersunk head and a Phillips drive, made of black galvanized steel to DIN 7046-1. It has 11 mm of thread, a total length of 13 mm.
Properties
- Type
- Flat head screw, Phillips drive
- Thread
- M4 x 0.7
- Thread length
- 11 mm
- Total length
- 13 mm
- Material
- Galvanized steel, black
- Color
- Black
- Pieces in the pack
- 1
A screw for many jobs
Phillips flat head screws are useful for a multitude of jobs: brackets, panels, covers and other parts where the head should sit low. In a countersunk hole the head ends level with the surface.
Phillips drive
Any Phillips screwdriver of the right size turns the screw, so no special tool is needed.
Check thread and depth first
Radiators and other parts use different threads (M3, M4 and 6-32 are the common ones) and different usable thread depths. Check what your part takes before you choose a size. On a radiator, a screw that is too long can reach the core and puncture a water channel, so always make sure the screw stops short of the fins.
Black finish
The black finish blends in with black fans, radiators and case parts, so the hardware does not stand out in a dark build.
Technical data
| Thread | M4 x 0.7 |
| Thread length | 11 mm |
| Total length | 13 mm |
| Head | Flat countersunk |
| Drive | Phillips |
| Quality grade | DIN 7046-1 |
| Material | Galvanized steel, black |
| Color | Black |
Notes
- This listing is for one piece. Add the quantity you need to the cart.
- ModMyMods black Phillips flat screws come in M3 x 6 and M4 x 11.
In the box
- 1x ModMyMods M4 x 11 Phillips Flat Screw - Black
