ModMyMods 4-Pin Floppy to SATA 15-Pin Male Power Adapter Cable (MOD-0286)

This short adapter cable powers a device with a 4-pin floppy power input from a SATA power connector of the power supply. The 15-pin SATA male connector plugs into a SATA power plug of the power supply cable, and the 4-pin floppy female connector takes the power input of the device. The wires are covered with black sleeving and finished with heatshrink at both ends.

Properties

Type

Power adapter cable

Input

15-pin SATA power, male

Output

4-pin floppy power, female

Cable

Black sleeved

Pieces in the pack

1

Floppy power from a SATA cable

Modern power supplies have plenty of SATA power plugs but few or no floppy power plugs. The adapter lets a device with a floppy power input, for example a floppy drive, a card reader, a controller board or another accessory, run from a SATA power plug instead.

Neat finish

Black sleeving covers the wires along the whole length, and heatshrink closes the sleeving at both connectors, so the adapter looks tidy in a windowed case.

Technical data

Notes

• Switch the power supply off before you connect or remove the adapter.
• Plug the floppy connector on the right way round; check the orientation of the power input of your device.

In the box

• 1x ModMyMods 4-Pin Floppy to SATA 15-Pin Male Power Adapter Cable