ModMyMods 3/8" ID x 1/2" OD Flexible PVC Tubing - Crystal Black (MOD-0300)

ModMyMods Flexible PVC Tubing in Crystal Black is soft tubing for PC water cooling with a 3/8" inner diameter and a 1/2" outer diameter, often listed as 13/10mm. The smooth inner walls keep the coolant flowing freely, and the tube slips onto compression and barb fittings of the matching size. It is made locally in the western New York area and sold by the foot in one continuous length.

Properties

Type

Flexible PVC tubing

Size

3/8" ID x 1/2" OD

Metric size

13/10mm

Material

PVC

Color

Crystal Black

Sold by

The foot, one continuous length

Sold by the foot, in one piece

One quantity is one foot of tubing. If you order 5, you receive one continuous 5-foot length, not five separate 1-foot pieces, so you can cut every run of your loop to the length it needs.

Smooth walls for good flow

The inside of the tube is smooth, so it adds as little resistance as possible to the flow of your loop. ModMyMods makes the tubing tough enough for years of use without wearing out or breaking down.

Fits compression and barb fittings

The 3/8" ID x 1/2" OD size takes compression fittings made for 13/10mm (3/8" ID x 1/2" OD) soft tubing and 3/8" barb fittings. Push the tube fully onto the barb of the fitting before you tighten the compression ring.

Three sizes, three colors

ModMyMods Flexible PVC Tubing comes in Crystal Clear in 3/8" x 1/2", 3/8" x 5/8" and 1/2" x 3/4", in Crystal Black in the same three sizes, and in Crystal White in 3/8" x 5/8". The Crystal Black version has a glossy black finish for builds where the tubing should match black parts. This listing is the 3/8" ID x 1/2" OD tube in Crystal Black.

Technical data

Notes

• Cut the tube square with a sharp tube cutter or blade so it seats evenly on the fitting barb.

In the box

• 1x ModMyMods 3/8" ID x 1/2" OD Flexible PVC Tubing - Crystal Black (1 foot per quantity)