Details
The LYNK+ RTX 5090 Plate Kit Zotac - Silver is the PCB-specific mounting kit that fits the LYNK+ RTX 5090 Upgrade Kit Cooler to the Zotac Gaming GeForce RTX 5090 Solid, Solid OC and AMP Extreme Infinity. It pairs a supporting backplate with a model-specific front plate, both in anodized aluminum with a silver finish, and weighs 200g. The kit is not a cooler on its own: it is the mechanical mounting interface between your card and the LYNK+ cooler module, which connects to a LYNK+ radiator module such as the Core Radiator Module 360.
Properties
- Fits
- Listed GeForce RTX 5090 Zotac Gaming cards, see below
- Parts
- Backplate and front plate
- Material
- Anodized aluminum
- Color
- Silver
- Weight
- 200g
- For cooler
- LYNK+ RTX 5090 Upgrade Kit Cooler (135920)
- Needs
- LYNK+ RTX 5090 cooler module and a LYNK+ radiator module
Compatibility
All models below are NVIDIA GeForce RTX 5090 graphics cards (PCB number in brackets where LYNK+ gives one):
- Zotac Gaming GeForce RTX™ 5090 Solid OC (ZT-B50900J-10P)
- Zotac Gaming GeForce RTX™ 5090 Solid (ZT-B50900D-10P)
- Zotac Gaming GeForce RTX™ 5090 AMP Extreme Infinity (ZT-B50900B-10P)
Compatibility depends on the exact graphics card and PCB revision, so the plate must match the card being converted. Check your card against LYNK+'s GPU and Plate Kit compatibility list before ordering, and contact us if you want us to verify compatibility with your GPU. The Plate Kit Reference Design (135950) is the version for the listed Inno3D, MSI and PNY cards, and LYNK+'s 5090 Plate Kit Palit (135954) covers the listed Palit and Gainward cards.
Zotac PCB matched mounting
The plate aligns the cooler's fixing points with the supported Zotac layouts and sets the intended spacing between the PCB and the cooler. This keeps the assembly secure and lets the cold plate sit correctly against the components it cools.
Fully enclosed anodized aluminum design
The kit combines a supporting backplate with a model-specific front plate that fits closely around the LYNK+ GPU cooler. The anodized aluminum surfaces stay lightweight, give a stable mounting base and match the silver cooler module, so the assembled graphics card has a clean, fully enclosed look.
Complete your LYNK+ GPU system
Combine the plate kit with the RTX 5090 Upgrade Kit Cooler and a LYNK+ radiator module such as the Core Radiator Module 360. The cooler transfers heat from the GPU die, the VRAM and the VRM power components, while the radiator module's integrated pump circulates coolant. Both modules arrive factory-filled and sealed, and their drip-free Quick Connect joins them without cutting hoses, filling the loop or bleeding it during installation.
Technical data
| Type | GPU backplate and PCB-specific cooler mounting plate kit |
| Material | Aluminum |
| Finish | Anodized |
| Color | Silver |
| Weight | 200g |
| GPU compatibility | Supported NVIDIA GeForce RTX 5090 models |
| PCB compatibility | Listed Zotac Gaming designs |
| Cooler compatibility | LYNK+ RTX 5090 GPU cooler module |
| Mounting function | Correct spacing, secure support and cold plate contact |
| Required components | LYNK+ RTX 5090 GPU cooler and a compatible LYNK+ radiator module |
| Product series | LYNK+ RTX 50 Series |
Notes
- Make sure the LED and fan cables are outside the cooler and lie in the cable slot before the backplate goes on.
- Fasten all screws lightly before tightening them, and do not use excessive force.
In the box
- 1x Backplate
- 1x Front plate
- 1x User manual
- 10x Backplate screws
- 3x Front plate screws
- 1x L-shaped key
LYNK+'s user manual for the RTX 5090 Upgrade Kit (cooler, plate kit and radiator), its GPU and Plate Kit compatibility list and its PC case compatibility list are PDFs.
