BLUFIXX PW Light Curing Repair Gel - Complete Kit For Plastic & Wood - Clear (DE-10.121.0000)

The BLUFIXX PW complete kit is a light-curing repair pen for plastic and wood. It holds a cartridge of clear PW repair gel and has a blue curing LED built in, so you can start right away: fill, rebuild or mold the damage, then cure the gel rock solid with the light. Cartridges and LED batteries are replaceable.

Properties

Type

Light-curing repair gel pen, complete kit

For

Plastics and wood materials

Gel

PW, clear

Curing

Built-in blue LED, 405 nm

LED batteries

4x LR41 (AG3), replaceable

Made in

Germany

For plastic and wood

BLUFIXX makes the PW gel for plastics such as ABS, PS, SAN, ASA, SB, PVC, CN, CAB, PC, melamine resins and GRP polyester, and for wood, particle board, plywood and MDF. Scratches or dents in a table, kitchen fronts or a plastic window frame, or a broken toy, can be repaired in minutes.

Not for every plastic

BLUFIXX lists PP, PE, PTFE, POM (acetal) and PMMA (acrylic, Plexiglas) as not suitable for the PW gel.

Cures only under the light

The gel stays liquid and moldable until the blue LED cures it, so it can be corrected until it is right, and it is solvent-free. Once cured, it is rock solid and water resistant, bonds at temperatures between -40°C and 140°C and only breaks under a load of 754 psi. You can then grind, drill, varnish, paint and polish it.

How to use it

• Clean the surfaces first: they must be free of dust, oil and dirt.
• Fill the gel into the damage in layers of no more than 2 mm; add more layers as needed.
• Cure each layer with the blue LED for 3 to 15 seconds. The gel only cures where the blue light reaches it.
• Then work it as you like: sand, paint or polish.

Technical data

Notes

• If the gel gets on your skin, wash it off. Do not use it if you are allergic to acrylates.
• The packaging is printed in German and may not include English instructions.

In the box

• 1x BLUFIXX repair pen holder with built-in blue LED
• 1x BLUFIXX PW repair gel cartridge, clear