BLUFIXX MGS Light Curing Repair Gel - Refill Cartridge For Metal, Glass & Stone - Clear (DE-10.112.0010)

This is a refill cartridge of clear BLUFIXX MGS light-curing repair gel for metal, glass and stone. It fits the BLUFIXX repair pen holder with the built-in blue LED, which cures the gel rock solid in seconds. Use it to repair, fill, rebuild and mold, then grind, drill, varnish, paint or polish the cured gel.

Properties

Type

Repair gel refill cartridge

For

Metal, glass, stone, porcelain and ceramics

Gel

MGS, clear

Curing

Blue LED of the BLUFIXX repair pen

Made in

Germany

For metal, glass and stone

BLUFIXX makes the MGS gel for metals and metal alloys such as aluminum, steel, brass, stainless steel, galvanized materials, copper and iron, and for glass, crystal, stone, porcelain, ceramics, marble and earthenware.

Cures only under the light

The gel stays liquid and moldable until the blue LED cures it, and it is solvent-free. Once cured, it is rock solid and water resistant, bonds at temperatures between -40°C and 140°C and only breaks under a load of 754 psi.

How to use it

• Clean the surfaces first: they must be free of dust, oil and dirt.
• Fill the gel into the damage in layers of no more than 2 mm; add more layers as needed.
• Cure each layer with the blue LED for 3 to 15 seconds. The gel only cures where the blue light reaches it.
• Then work it as you like: sand, paint or polish.

A refill for the repair pen

The refill cartridge is meant for the BLUFIXX light-curing repair pen kits: swap it into the pen holder in place of an empty or different cartridge. It holds gel only; the holder and curing LED are not included.

Technical data

Notes

• If the gel gets on your skin, wash it off. Do not use it if you are allergic to acrylates.
• The packaging is printed in German and may not include English instructions.

In the box

• 1x BLUFIXX MGS repair gel refill cartridge, clear