Barrow LRC2.0 5-Way RGB Splitter Cable (ARKZXS1-5)

The Barrow ARKZXS1-5 is a 1 to 5 splitter cable for Barrow LRC 2.0 (Aurora) 5V addressable RGB lighting. One 2510 3-pin connector goes to your controller or other source, and five 2510 3-pin connectors feed up to five lighting products, so they all run the same effect in sync.

Properties

Type

1 to 5 lighting splitter cable

Connectors

2510 3-pin, 1 input and 5 outputs

Lighting system

Barrow LRC 2.0 (Aurora), 5V addressable RGB

Color

Black

Pieces in the pack

1

One source, five lighting products

Barrow made this cable to add connections to its manual lighting controllers, such as the ARSKZQ, and to any other 2510 3-pin lighting connection. Plug the single connector into the controller and connect up to five LED strips, blocks, reservoirs or fittings to the other ends. All of them get the same signal, so their effects stay in step.

Chain two for more

Barrow says two splitter cables can be combined to get even more spare connections.

2510 connectors

All ends use the 2510 3-pin connector of Barrow lighting, male on one side and female on the other, with black wires.

Technical data

Notes

• The more LEDs you connect, the more current the source has to deliver, so check the limit of your controller or motherboard header.
• Barrow notes that it may update the look or construction of the product without notice; the product you receive is the current version.

In the box

• 1x Barrow LRC2.0 5-Way RGB Splitter Cable