Details
The Barrow YCR-800 is an 800 mm extension cable for Barrow LRC lighting with 4-pin connectors, the RGB system that came before LRC 2.0. It has a 2510 4-pin connector at each end, male and female, so it fits between a Barrow 4-pin RGB product and its controller when the original cable is too short.
Properties
- Type
- Lighting extension cable
- Length
- 800 mm
- Connectors
- 2510 4-pin male to 2510 4-pin female
- Lighting system
- Barrow LRC (RGB, 4-pin)
- Color
- Black
- Pieces in the pack
- 1
More reach for 4-pin lighting
Barrow made this cable to extend the 2510 4-pin lighting cables of its LRC system inside the case: LED strips, lit blocks, reservoirs and fittings with a 4-pin RGB plug, and controllers such as the ZDKZQ. Plug it in between the lighting and the controller to bridge the distance across the case.
Plug and play
All four lines run straight through, so the lighting works as if it were connected directly. The wires are black and lie flat side by side.
Technical data
| Model | YCR-800 |
| Type | LRC lighting extension cable |
| Length | 800 mm |
| Connectors | 2510 4-pin male | 2510 4-pin female |
| Lighting system | Barrow LRC, 4-pin |
| Color | Black |
Notes
- This cable is for Barrow's 4-pin LRC lighting. It does not fit the 3-pin LRC 2.0 (Aurora) 5V lighting; for that, Barrow made the YCAR-800.
- Barrow has discontinued this cable; we sell the remaining stock.
- Barrow notes that it may update the look or construction of the product without notice; the product you receive is the current version.
In the box
- 1x Barrow RGB Extension Cable - 80cm
