Details
The Barrow YCAR-800 is an 800 mm extension cable for Barrow LRC 2.0 (Aurora) 5V addressable RGB lighting. It has a 2510 3-pin connector at each end, male and female, so it fits between any Barrow LRC 2.0 product and its controller or header when the original cable is too short.
Properties
- Type
- Lighting extension cable
- Length
- 800 mm
- Connectors
- 2510 3-pin male to 2510 3-pin female
- Lighting system
- Barrow LRC 2.0 (Aurora), 5V addressable RGB
- Color
- Black
- Pieces in the pack
- 1
More reach for LRC 2.0 lighting
Barrow made this cable for its LRC 2.0 lighting products that use the 2510 3-pin connection: LED strips, blocks, reservoirs, fittings and the matching controllers and splitters. Plug it in between the lighting cable and the controller, splitter or motherboard adapter to bridge the distance across the case.
Plug and play
The cable carries the three lines of the 5V system (5V, data and ground) straight through. There is nothing to set up; the lighting works as if it were connected directly.
Technical data
| Model | YCAR-800 |
| Type | Aurora lighting extension cable |
| Length | 800 mm |
| Connectors | 2510 3-pin male | 2510 3-pin female |
| Lighting system | Barrow LRC 2.0, 5V addressable RGB |
| Color | Black |
Notes
- This cable is for the 5V LRC 2.0 (Aurora) system with 3-pin connectors. For the older 12V LRC lighting with 4-pin connectors, Barrow made the YCR-800.
- Barrow has discontinued this cable; we sell the remaining stock.
- Barrow notes that it may update the look or construction of the product without notice; the product you receive is the current version.
In the box
- 1x Barrow LRC 2.0 Aurora RGB Lighting Extension Cable - 80CM





