Details
The Barrow ZBDZJX-5M is a short adapter cable that connects Barrow LRC 2.0 (Aurora) 5V addressable RGB lighting to the 5V ARGB header of your motherboard. One end has the standard 3-pin plug for the motherboard header, the other the 2510 3-pin connector of Barrow lighting, so the motherboard RGB software can control your Barrow products together with the rest of the build.
Properties
- Type
- Motherboard ARGB adapter cable
- Length
- 100 mm
- Connectors
- 3-pin 5V motherboard ARGB to 2510 3-pin
- Lighting system
- Barrow LRC 2.0 (Aurora), 5V addressable RGB
- Color
- Black
- Pieces in the pack
- 1
Sync Barrow lighting with the motherboard
Plug the wide 3-pin connector onto a 5V ARGB header of the motherboard (the header with three pins and one gap, marked 5V, D, G) and connect the 2510 end to your Barrow LED strip, block, reservoir, fitting, splitter or extension cable. Effects and colors then come from the motherboard software, in step with your fans, memory and other ARGB parts.
Short revision
The ZBDZJX-5M is the revised version of Barrow's ZBDZJX-5. Barrow shortened the cable from 40 cm to 10 cm, which keeps the run near the header tidy; add an extension cable such as the YCAR-800 where you need more reach.
Technical data
| Model | ZBDZJX-5M (revision of ZBDZJX-5) |
| Type | 5V ARGB connection cable |
| Length | 100 mm |
| Connectors | 3-pin 5V ARGB motherboard plug | 2510 3-pin |
| Lighting system | Barrow LRC 2.0, 5V addressable RGB |
| Color | Black |
Notes
- Use only a 5V ARGB header. A 12V RGB header (4 pins) will damage 5V addressable lighting.
- Barrow notes that it may update the look or construction of the product without notice; the product you receive is the current version.
In the box
- 1x Barrow 5V Aurora Motherboard & Lighting Control Connection Cable - 100mm





