Barrow G1/4" Kepler Series Filter - Black (GLA-K1)

The Barrow GLA-K1 is an in-line filter from Barrow's Kepler series. It sits in the tubing run with a female G1/4" port at each end and catches particles in the coolant before they reach a block or the pump. The body is black with round cut-outs and the Barrow name, between two shiny silver end caps.

Properties

Type

In-line filter

Ports

G1/4" female, 2 (one at each end)

Size

74.6 mm long, 23 mm diameter

Material

Brass and aluminum alloy

Color

Black body, silver end caps

Pieces in the pack

1

Catch debris before it reaches the blocks

Flux, machining chips, dust from a new radiator or bits of tubing can travel around a new loop and settle in the fine channels of a CPU or GPU block. An in-line filter catches them in one place, where they can be cleaned out.

Fits any G1/4" loop

Both ends are female G1/4" ports, so you screw a standard fitting into each end and put the filter anywhere in a soft or hard tube run, or screw it straight onto a component with a male to male extender.

Brass and aluminum

Barrow builds the Kepler filter from brass and aluminum alloy. The 74.6 mm body has rows of round cut-outs with the Barrow name between them, and the end caps have a ribbed, tapered shape.

Technical data

Notes

• Barrow sells the Kepler filter with a black, titanium gray or white body, always with silver end caps. This listing is the black version.
• Fittings are not included; each end takes a standard G1/4" fitting.
• Barrow notes that it may update the look or construction of the part without notice; the part you receive is the current version.

In the box

• 1x Barrow G1/4" Kepler Series Filter - Black