Details
The Aquacomputer Replacement Controller for D5 NEXT Pump is the controller unit with display for the D5 NEXT, including its plastic housing. The pump motor is not included in delivery, and this controller can not be used without a D5 NEXT pump motor: it is not compatible with other D5 variants.
Properties
- For
- D5 NEXT pump motor
- Pieces
- 1 controller unit
- Material
- Plastic housing
- Display
- OLED display
How it fits
The controller unit sits on the rear end of the D5 NEXT and comes off by pulling it straight away from the pump motor unit. It goes back on in one given orientation only. If it does not seat, re-check the orientation rather than using excessive force. Make sure no power is supplied to the pump whenever the unit is removed or re-attached.
What it needs
The controller drives a D5 NEXT replacement pump motor (41128) or the motor of an existing D5 NEXT pump (41118). Configuring the pump on its display or with the aquasuite software is covered in the D5 NEXT manual.
Notes
- The pump controller on the rear end of the pump must not get in contact with water.
Aquacomputer's manual for the D5 NEXT is an English PDF with the installation steps and every menu of the pump.
