Details
The Aquacomputer Flow Meter Cable (53027) is a three pin connection cable, approx. 70 cm long, that links one of the Aquacomputer flow meters (flow sensor 53061 or 53068) to an Aquacomputer device with a fan type connector for flow sensors.
Properties
- For
- Flow sensors 53061 and 53068
- Length
- approx. 70 cm including connectors
- Plugs
- Female on both ends, one a special connector for the flow sensor
- Wires
- Three pin
How it connects
Both ends carry female plugs. One end is a special connector that fits the flow sensor, and the other goes to the fan type flow sensor input of the device, for example on the aquaero 6 PRO (53145). The 70 cm length is measured including the connectors.
Compatibility
Aquacomputer lists the cable as compatible with two flow sensors (the first two lines) and with these devices:
- Flow sensor "high flow" G1/4 (53068)
- Flow sensor with 5.6 mm nozzle (53061)
- aquaero 6 XT / PRO / LT (53145, 53146, 53206, 53234, 53250, 53251, 53253, 53262, 53263)
- aquaero 5 XT / PRO / LT (53089, 53090, 53095, 53125, 53249, 53252)
- aquaero 4.00 / 3.07 (53030, 53031, 53035, 53045, 53048, 53064, 53075, 53076)
- aquastream ULTIMATE (41108)
- D5 NEXT (41118)
- aquastream XT (41059, 41060, 41061)
- poweradjust 3 (53166, 53167)
- poweradjust 2 (53082, 53083)
- poweradjust (53049, 53054)
- aquaduct 240 Pro mark III (11213)
- aquaduct 360 eco+ (11212, 11233)
