Details
The Alphacool G1/4 HF 9.75mm Male to Female Extension Fitting - Deep Black is a 9.75 mm extension with a G1/4 male thread on one end and a G1/4 female thread on the other. There is one fitting per pack. It is an adaptor that can be used to extend any connection of your choice with a 1/4 inch thread.
Properties
- Thread
- G1/4 male to G1/4 female
- Length
- 9.75 mm
- Width
- D18 mm
- Material
- brass, chromated
- Color
- Deep Black
- Pieces in the pack
- 1
Functionality
This connector sits between a port and the fitting you want to move outward. The element is not revolvable but fixed, making it what Alphacool calls ideal, or optimal, to give the hose a precise direction.
High flow and finish
Alphacool says its fittings go new ways in looks, quality of manufacturing, colors and choice, or in its newer wording break new ground in shape, processing and variety. It adds that the inner diameter of these connections truly deserves the "high flow" attribute, and calls that the absolute innovation.
The first three colors are Chrome, Deep Black and Shiny Copper, which Alphacool says offer something for every taste. The product matching series are designed to look elegant in every system, highlighting the individual design of the computer. In Alphacool's words the limits are endless in combination with Alphacool tubing.
The surface finish is completely connected with the brass body by a new process during chromatizing. Alphacool describes the coloring as firmly bonded to the brass base, hence ensuring permanent intense colors and no peeling or flaking of the chrome layer.
What a run needs
The male end screws into a G1/4 port, and the female end takes the G1/4 fitting it extends, so have that fitting ready. Other lengths are in our male to female extension fittings section.
Notes
- Use only clear, transparent water cooling fluids. Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses, which can void the manufacturer's warranty.
Alphacool's 3D model of this fitting is an STP file, and the 3D viewer shows it from every side.
