Details
The Alphacool ES Quick Release BLH1A PushIn Set OT-OT is a quick disconnect coupling with a G1/4 outer thread (OT) on both sides, one set per pack. Alphacool has optimized this ES quick-release connector for use in server and workstation systems.
Properties
- Thread
- 2x G1/4 outer thread (OT)
- Dimensions (L x D)
- 67 x 28 mm
- Material
- Nickel-plated brass, plastic
- Color
- Chrome, black
- Flow rate reduction
- -1.37 %
- Pieces in the pack
- 1 set
Maximum flow rate
Other quick couplings can affect the flow of water negatively. Alphacool says the quick coupling has therefore been fundamentally redesigned so that the water flow is hardly disrupted. It adds that particular emphasis was placed on minimal processing tolerances. In Alphacool's words, it is characterized by precise manufacturing quality, excellent water flow and a secure click mechanism for sealing.
Quick and easy
The ES quick connectors from Alphacool are meant to simplify the assembly of server and workstation systems. Thanks to the convenient handling, Alphacool says, complex systems can be connected quickly and easily. The quick-release fastener opens when the outer ring is pulled back. The seal then closes immediately and prevents coolant from escaping. To lock the quick-release fasteners again, simply push them into each other until a clicking noise confirms secure locking.
What a run needs
Each side ends in a G1/4 outer thread, so it screws into a port or fitting with a G1/4 inner thread. Matching parts are in our fittings section, and more couplings are under quick disconnect fittings. The halves are also stocked singly, as the PushIn Male OT and the PushIn Female OT.
Technical data
| Dimensions (L x D) | 67 x 28 mm |
| Weight | 140 g |
| Pressure test | 8 bar |
| Material | nickel-plated brass, plastic |
| Thread | 2x G1/4 OT |
| Color | chrome, black |
| Flow rate reduction (%) | -1.37 |
Notes
- Note: to avoid damaging the O-ring, do not open or close the quick-release fastener when it is dry.
- Use it only with clear, transparent water cooling fluids. Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses.
In the box
- 1x Alphacool ES Quick Release BLH1A PushIn Set OT-OT
Alphacool's data sheet lists the technical data.
