Alphacool ES Pro 3U - 3 x 120 ST / 2x XPX Pro 1U / Reservoir 2U - DDC310 (11897)

The Alphacool ES Pro 3U - 3 x 120 ST / 2x XPX Pro 1U / Reservoir 2U - DDC310 is a prefilled water cooling kit for 3U server racks and workstations with two processors. It combines two Eisblock XPX Pro 1U CPU coolers, a full copper 360mm radiator for three 120 mm fans and a 2U reservoir with a DDC310 pump. Every kit is made to order, with the tubing length set by our Mod Team for your server. If the board has a single socket, the 3 x 120 ST set with one XPX Pro 1U is this kit with one block.

Properties

CPU cooler

2x Eisblock XPX Pro 1U

Radiator

NexXxoS ST30 Full Copper 360mm, 3 x 120 mm

Reservoir

ES Reservoir 2U, integrated pump top

Pump

DDC310

Intel sockets

2011, 2011-3, 2066, 3647, 4189, 1700

AMD sockets

TR4, TR5, TRX40, sWRX8, SP3, SP6, AM4, AM5

Made to order

We can help you keep your server rack cool. Let us know what you run: server racks differ in size and positioning of individual components, so all kits are individually adjusted for tubing length. Since every setup is its own case, our Mod Team can put together a server cooling kit that is specific to your setup, with the Enterprise Solution Sets from Alphacool as the starting point. Contact our support team at ModMyMods.com ([email protected]) to provide your tubing length, any special requests, and further information about your system. We'll do the work for you: get a kit, and we'll make it fit!

Notice: all kits are built after the order comes in, and lead times are dependent on current product inventory. If a specific product in this kit is not available, please be aware that the kit could take 30 days or more to complete. Our support team will keep you updated with the status of your order as stock becomes available. Feel free to reach out to us at the same address for order updates, product availability, or specific build inquiries. We are here to help.

Cooling capacity

This setup can dissipate up to 1200 W. Alphacool states that figure at an ambient temperature of 30 °C and a fan speed of 4000 rpm. The radiator takes three 120 mm fans.

CPU cooler

This set carries two Eisblock XPX Pro 1U water blocks, so each processor of a dual socket board gets its own. Alphacool lists the set for the Intel sockets 2011, 2011-3, 2066, 3647, 4189 and 1700, and for AMD TR4, TR5, TRX40, sWRX8, SP3, SP6, AM4 and AM5.

Radiator

The heat leaves the loop through a NexXxoS ST30 Full Copper 360mm radiator. Alphacool relies on full copper radiators for these sets, which it says offer almost twice the thermal capacity of aluminum radiators. As a result, in Alphacool's words, a significantly better cooling performance is achieved. That matters due to the extreme packing density in server racks and workstations, where heat has to be moved away from tightly packed parts.

Reservoir

The ES Reservoir 2U includes an integrated pump top, and the pump of this set sits on it. Alphacool builds its server reservoirs specifically adapted to the respective height unit (1U, 2U, 3U, 4U) of the server racks, and this 3U set gets the 2U one. In addition, all reservoirs offer a variety of connection options, so the placement in the server can vary and be adapted according to your needs.

Hoses and Connectors

Alphacool leaves out the usual PVC hoses and uses TPV. According to Alphacool the TPV tubing withstands higher heat than basic PVC tubing and resists buckling long term, so kink protection springs are largely unnecessary. The connections include special locking collars for the tubing, and that locking ring is what gives them their high-tensile strength. Compared to standard water cooling components, Alphacool rates them far safer, so you can feel secure and safe knowing all is secured from the start.

Pumps

A DDC310 moves the coolant in this set. That pump and the DC-LT 3600 industrial pump have been on the market for years, and their longevity is why we have chosen them for these kits.

Prefilled

The Enterprise Solution Sets are always delivered prefilled, and this one is no exception. The set does not have to be assembled or filled by you: the only step left is to place the finished system in your server rack.

In the box

• CPU Cooler: 2 x Eisblock XPX Pro 1U
• Reservoir: Eisstation 2U DDC
• Radiator: NexXxoS ST30 Full Copper 360mm
• Pump: DDC310