Alphacool ES Pro 3U - 1 x 120 ST / XPX Pro 1U / Reservoir 2U - DDC310 (11838)

The Alphacool ES Pro 3U - 1 x 120 ST / XPX Pro 1U / Reservoir 2U - DDC310 is a prefilled water cooling kit for 3U server racks and workstations with one processor. It holds one Eisblock XPX Pro 1U CPU cooler, a full copper radiator for one 120 mm fan and a 2U reservoir with a DDC310 pump. All kits are made to order, and our Mod Team adjusts the tubing length to your server. For a dual socket board, the 1 x 120 ST set with two XPX Pro 1U is the same kit with a second block.

Properties

CPU cooler

1x Eisblock XPX Pro 1U

Radiator

NexXxoS ST30 Full Copper 120mm, 1 x 120 mm

Reservoir

ES Reservoir 2U, integrated pump top

Pump

DDC310

Intel sockets

2011, 2011-3, 2066, 3647, 4189, 1700

AMD sockets

TR4, TR5, TRX40, sWRX8, SP3, SP6, AM4, AM5

Made to order

Let us help you keep your server rack cool. Racks differ in size and in the positioning of individual components, so all kits are individually adjusted for tubing length. Since no two are alike, our Mod Team can put together a server cooling kit that is specific to your setup, with the Enterprise Solution Sets from Alphacool as the base. Contact our support team at ModMyMods.com ([email protected]) to provide your tubing length, any special requests, and further information about your system. We'll do the work for you: get a kit, and we'll make it fit!

Notice: lead times are dependent on current product inventory. If a specific product in this kit is not available, please be aware that the kit could take 30 days or more to complete. Our support team will keep you updated with the status of your order as stock becomes available. Feel free to reach out to us at the same address for order updates, product availability, or specific build inquiries. We are here to help.

Cooling capacity

This setup can dissipate up to 400 W. Alphacool gives that figure at an ambient temperature of 30 °C and with a fan running at 4000 rpm. The radiator takes one 120 mm fan.

CPU cooler

One Eisblock XPX Pro 1U water block comes in this set, for a board with a single socket. Alphacool lists the set for the Intel sockets 2011, 2011-3, 2066, 3647, 4189 and 1700 and for AMD TR4, TR5, TRX40, sWRX8, SP3, SP6, AM4 and AM5.

Radiator

The radiator is the NexXxoS ST30 Full Copper 120mm. Alphacool relies on full copper radiators for these sets and says they offer almost twice the thermal capacity of aluminum radiators. As a result, in its words, a significantly better cooling performance is achieved, which matters due to the extreme packing density in server racks and workstations.

Reservoir

The ES Reservoir 2U includes an integrated pump top, which carries the pump of this set. Alphacool's server reservoirs are specifically adapted to the respective height unit (1U, 2U, 3U, 4U) of the server racks, and this 3U set uses the 2U one. In addition, all reservoirs offer a variety of connection options, so the placement in the server can vary and be adapted according to your needs.

Hoses and Connectors

The hoses are TPV, not the usual PVC. Alphacool says the TPV tubing withstands higher heat than basic PVC tubing, resists buckling long term and is much more kink resistant, so kink protection springs are largely unnecessary. The connections include special locking collars for the tubing, and that locking ring gives them high-tensile strength. Compared to standard water cooling components, Alphacool calls them far safer, so you can feel secure and safe knowing all is secured from the start.

Pumps

The pump in this set is the DDC310. It and the DC-LT 3600 industrial pump have been on the market for years, and their longevity is why we have chosen them for these kits.

Prefilled

Like all Enterprise Solution Sets, this one is always delivered prefilled. It does not have to be assembled or filled: you only have to place the system in your server rack.

In the box

• CPU Cooler: Eisblock XPX Pro 1U
• Reservoir: Eisstation 2U - DDC
• Radiator: NexXxoS ST30 Full Copper 120mm
• Pump: DDC310