Details
The Alphacool Eiszapfen Pro 16mm Spare Parts kit is a set of ten replacement O-rings for the Eiszapfen Pro 16 mm HardTube fittings, Alphacool article 17566. Alphacool no longer includes the nylon inserts in this kit, so the article contains the O-rings only. It is not recommended for use with Bitspower brand tubing.
Properties
- Fits
- Alphacool Eiszapfen Pro fittings, size 16 mm
- Tube size
- 16 mm outer diameter HardTube
- Pieces in the pack
- 10 O-rings
What the O-ring does
The wide O-ring is inserted inside the Eiszapfen Pro fitting, where it seals the HardTube.
About the nylon inserts
Nylon inserts are only required for PETG HardTubes. Compared to acrylic HardTubes, PETG ones are soft and can deform from rising temperatures and compression forces. This happens especially at the outlets of the GPU and CPU, where they reach higher temperatures, which can contribute to the deformation. These deformations can lead to leakage. In combination with the Eiszapfen Pro connectors, the inserts prevent it.
What a run needs
Each O-ring goes into one Eiszapfen Pro fitting on a 16 mm tube, and tubes to match are in our 16mm hard tubing section.
Notes
- Please note: Alphacool no longer includes the nylon inserts in the spare parts kit.
- We are extremely sorry for the inconvenience!
In the box
- 10x Replacement O-rings for Eiszapfen Pro 16mm fittings
