Details
The Alphacool Eisrohr 14/11mm PETG HardTube 80cm - 4pcs is clear PETG hard tube with a 14 mm outer and 11 mm inner diameter. The pack holds four tubes of 80 cm each, 320 cm in all.
Properties
- Tube size
- 14/11 mm
- Length
- 80 cm per tube
- Material
- PETG, clear
- Pieces in the pack
- 4
Bending
Alphacool says these tubes give the user the possibility to create a very special look. Alphacool calls the tubes very strong, but they can still be bent without great effort and are easy to fit. PETG HardTubes are probably the easiest to bend compared to those made of other materials: they require significantly less heat than PMMA HardTubes, for example. The tubes are absolutely clear, and Alphacool says they will look great in almost every water cooling loop.
Cutting
When cutting the tubes, make sure to chamfer the edges, as sharp edges can damage the O-rings of fittings. A fine file, sandpaper or the Alphacool Strong Guy pipe and hose deburrer does it.
What a run needs
A tube run takes two 14mm OD hard tube fittings, one at each end.
Technical data
| Outer diameter | 14 mm |
| Inner diameter | 11 mm |
| Length | 80 cm |
| Material | PETG clear |
| Net weight | 58 g |
Notes
- Alphacool's note on application: use the tube only with clear, transparent water cooling fluids.
- Alphacool warns that the particles and additives in pastel liquids can clog and permanently damage radiators, pumps, coolers and hoses, which can also void the manufacturer's warranty.
In the box
- 4x Alphacool Eisrohr 14/11mm PETG HardTube 80cm
Alphacool's 3D model of this tube is an STP file to download, and the 3D viewer shows it from every side.
