Xerapol Acryl/Plexiglass Cleaner - 50g (32213)

The Xerapol acrylic scratch remover, sold in the QUIXX System range ("by Xerapol"), takes scratches out of acrylic and PLEXIGLAS surfaces. It is a complete kit: a 50 g tube of special polish, a polishing cloth and fine sanding paper for deeper scratches. In a water cooling build it brings scuffed acrylic reservoirs, block tops and case windows back to a clear shine.

Properties

Type

Acrylic scratch remover kit

For

Acrylic and PLEXIGLAS surfaces

Polish

50 g tube

Sanding paper

1500 grit

Not for

Polycarbonate (PC), printed, varnished or coated surfaces

Made in

Germany

Scratches out of acrylic

Acrylic scratches very easily, which is especially annoying on the clear parts of a water cooling system. QUIXX says the scratch remover takes scratches out of acrylic and PLEXIGLAS on cars, motorcycles, caravans, boats and aircraft windows, and on household items such as furniture, acrylic tubs and wash basins.

How to use it

• Clean the surface with a mild household cleaner and dry it well.
• Light scratches: apply a little paste and polish with the cloth, or a soft clean cotton cloth, with heavy pressure for 2 to 3 minutes, alternating horizontal and vertical strokes. Repeat for deeper scratches.
• Very deep scratches: first wet-sand them with the 1500 grit paper and a little water, at a 90° angle to the scratch, rinsing in between to check progress. Then polish as above.
• Polish off the residue with the cloth and clean the surface with clear water.

Test first

Try the polish on a spot that is not visible first to make sure the material takes it. Do not use it on polycarbonate (PC), or on printed, varnished or coated surfaces. Keep it out of reach of children.

Technical data

Notes

• Current kits come in the newer QUIXX Acrylic Scratch Remover packaging; the contents and use are the same.

In the box

• 1x Polish, 50 g tube
• 1x Polishing cloth
• 1x Sanding paper, 1500 grit

QUIXX's user manual is a PDF.