Details
Replacement o-rings for the HEATKILLER® CPU Rev.3.0 water block: one large and one small seal, two pieces in all. The Watercool Replacement O-Rings HEATKILLER® CPU Rev.3.0 (79250) are the 2x O-ring Watercool sells as a spare for that block.
Properties
- For
- HEATKILLER CPU Rev.3.0
- Pieces
- 2 (1 large, 1 small)
- Article
- 79250
When you need them
The seals matter when the block is opened, for example when it is converted to a different socket. For that the base plate comes off, after you loosen the 6 socket screws (SW 2.0) on the underside of the cooler.
When you mount the base plate again, Watercool asks you to make absolutely sure that the die plate and the o-ring are seated correctly. A die plate that sits crooked can damage the base plate irreparably. More seals for other blocks are in our o-rings category.
Notes
- Check the cooler thoroughly for tightness before you run the system again.
In the box
- 1x O-ring large
- 1x O-ring small
Watercool's assembly instructions cover the whole HEATKILLER CPU Rev3.0 series, including the socket conversion with the base plate removed.
