Details
A pump cable that links a HEATKILLER D5 PWM pump to Watercool's Passive Control or Active Control. The Watercool PUMP 170 Cable (63220) follows Watercool's WPI standard.
Properties
- For
- HEATKILLER D5 PWM pump
- Connects to
- Watercool Passive Control or Active Control
- Standard
- WPI (WATERCOOL Pump Interface)
- Pieces
- 1 cable
Built on the WPI standard
The cable is based on the WPI WATERCOOL Pump Interface (Wpi), which Watercool calls an innovative standard. Watercool describes it as its premium connection cable: it enables a seamless integration of the pump with the Active or Passive Control.
The cable is compatible only with a HEATKILLER D5 PWM pump, and only in combination with a passive or active control from Watercool.
What you need with it
You need the HEATKILLER D5 PWM pump and a Passive or Active Control from Watercool. To run a standard D5 or DDC pump on those controls instead, use the Molex adapter cable (63208) or the SATA adapter cable (63209). Pumps of this type are in our D5 pumps category.
In the box
Scope of delivery, as Watercool lists it:
- 1 x WATERCOOL PUMP 170 cable
