Details
A pair of fan adapters for mounting a HEATKILLER® Tube series reservoir to the mounting holes of a 120 x 120 mm fan, for example on a radiator. The Watercool HEATKILLER® Tube - 120mm Fan Adapter - Pair (30233) works only together with the Basic Mounting Kit, which is sold separately.
Properties
- For
- HEATKILLER Tube reservoirs on 120 mm fan holes
- Pieces
- 2 adapters, mounting material
- Size
- 120 x 15 x 10 mm
- Material
- POM (acetal), black
- Screws
- Prepared for M3
Your reservoir on a radiator
The adapters screw into the mounting holes of a 120 x 120 mm fan. That way the reservoir can sit straight on a radiator, a HTSF2 one for example. Each adapter is prepared for M3 screws on the fan side. Watercool's technical specifications give the dimensions (LxWxH) as 120 x 15 x 10 mm, in POM (acetal), black in color.
On the reservoir side they fasten to the Basic Mounting Kit, two M4 screws per adapter. A decoupling unit can be used there instead.
What you need to mount it
Please note: the Watercool HEATKILLER Tube Basic Mounting Kit (product number 30236) is required, and this is available separately. The reservoirs themselves are in our tube reservoirs category. For 140 mm fans the same pair comes as the 140mm Fan Adapter.
Notes
- Drain the reservoir and take it out of the loop before you change anything on it.
In the box
- 1x HEATKILLER® Tube - 120mm Fan Adapter (pair)
- mounting material
Watercool's assembly instructions cover the whole HEATKILLER Tube series, with product information on the Basic Mounting Kit and each mounting option.
