Our new HEATKILLER V PRO graphics card coolers for ASUS RTX 4090 STRIX and TUF were specially developed to cope with the high power loss of 450 watts and more. In order to ensure a correspondingly high increase in performance, we decided on a modular high-performance base plate. Proven technologies such as dual-layer inflow and symmetrical cooling design have also been introduced. The result is impressive both visually and in terms of performance in the form of the HEATKILLER V PRO series.

Important key points of the HK V PRO series:

• High performance base plate
• Selected high-performance thermal pads for GDDR6X RAM
• Dual layer inflow
• Symmetrical cooling design
• Design-integrated connection threads in the terminal
• Screwless design
• Insulating spacers made of high-performance plastic (Peek)
• Plug-in system for aRGB stripes
• CNC cut thermal pads

Modular high-performance base plate with 60 x 0.25mm fins

In order to increase the cooling performance in the area of ​​the GPU core, we have integrated a modular high-performance base plate into the heat sink. Thanks to finely slotted fins and the resulting increase in the cooling surface, this ensures a significantly higher cooling performance than a monolithic design is capable of. We chose the fin structure in such a way that, in addition to increasing the performance of the GPU core, the flow rate is also kept high. All distances to heat-relevant components were kept short, which means that the heat from thermal problem areas such as the GDDR6X Ram and voltage converter is ideally dissipated.

The PEEK spacers made from high-performance plastic ideally isolate the cooler from the circuit board and make installation easier. The legendary Kryonaut thermal paste from Thermal Grizzly ensures the best possible heat transfer.
 

Dual layer inflow and symmetrical cooling design

The dual-layer inflow, like the symmetrical cooling design, can also be found in the PRO version of our HEATKILLER V GPU cooler. The increased inflow is particularly important for the high-performance base plate. Splitting the water into two levels ensures better flow through the cooler. The wide and symmetrically designed flow paths optimize the flow and thus the general performance of the HEATKILLER V Pro cooler.
 

Selected high-performance thermal pads for GDDR6X

Our development department has invested a lot of time finding the ideal thermal pads for the hot GDDR6X RAMs. We found a thermal pad that significantly reduces the temperatures around the GDDR6X RAM compared to the very good standard pads.
 

Design-integrated side connection threads

Another innovation is the connection threads integrated into the side of the terminal. Together with the screwless panel and the backplate included in the package, the result is a cooler that looks like a unit.

In order to achieve the best possible appearance, the HK V PRO was designed so that no electronic components on the board can be seen.
 

Backplate and aRGB in the package

The new cooler design relies on assembly including a backplate. In our case, the black backplate ensures improved distribution of forces around the cooling block. In addition to an impressive look, you also get better temperatures.

The aRGB stripes used now rely on a modular structure and a compact plug-in system. Thanks to the high compatibility of our LEDs, the Heatkiller can be integrated into any lighting concept. The plug-in system also allows you to easily use the cooler without lighting.
 

Made in Germany

The production is carried out with the greatest care on our ultra-modern CNC machine park in Waren an der Müritz. Many work steps are carried out by hand and each product is brought to perfection according to the four-eye principle. Made in Germany as you would imagine.
 

Technical data:
Material base plate: Nickel-plated electrolytic copper
Material cover: PLEXIGLAS® GS
Material cover: polished stainless steel
Material connection terminal: Acetal  
Dimensions: (LxWxH): 246 x 134 (incl. terminal) x 33mm (incl. backplate)
Connection: 4x G ¼ inch (DIN ISO 228-1)
Approved up to 1 bar

Compatibility:
ASUS RTX 4090 STRIX and TUF

Not compatible:
ASUS RTX 4090 TUF OG/OG-OC