With the HEATKILLER®V for AMD Radeon RX6800/6900XT we are continuing the current HEATKILLER V generation with extensive optimizations. The fullcover water block draws on over 20 years of know-how in the development and production of high-performance water coolers. Equipped with unique highlights, the latest version of the HEATKILLER® V presents what is technically possible.

Significant improvements compared to its predecessor:

• Dual layer inflow
• Refined vertical cooling structure
• Increased flow
• Symmetrical cooling design
• Screwless cover
• HEATKILLER High-Luminous aRGB as standard (Acrylic-Nickel only)
• Insulating spacers made of high-performance plastic (Peek)
• CNC cut thermal pads
• Kryonaut thermal paste

By increasing the number and specially arranged cooling fins, we managed to massively increase the cooling performance directly above the graphics processor and thus improve the most important area. The radiator base, milled from a solid copper block, establishes contact with all relevant components. The pioneering dual-layer inflow distributes the water on two levels at the same time. This ensures an inflow that is at least 30 percent higher than with our previous generation.

The wide and symmetrically designed flow paths reduce dead spots (stagnant water) to a minimum and accelerate the flow. The overall result increases not only the maximum cooling performance but also the flow rate of the HEATKILLER® V. Thanks to newly designed spacers made of high-performance plastic (PEEK), the solid copper block is optimally insulated from the circuit board.

In addition to the technical innovations, the design of the cooler is also impressive. The screwless cover makes the entire block appear as if it were cast from a single piece. The symmetrically designed channels further emphasize the look of the cooler and make it a unique element in every mod. The integrated high-luminous aRGB LED strips are now also standard in combination with the nickel- acrylic variants. This means that the HEATKILLER® V can be perfectly integrated into the computer's lighting concept.

For the best possible look, the optionally available backplate is strongly recommended. Thanks to the unique production, all electronic components are hidden without sacrificing illumination. The block in combination with the backplate makes the HEATKILLER®V look like a unit for the current AMD graphics card generation and presents the legendary cooler in a completely new light.

The legendary Kryonaut thermal paste from Thermal Grizzly creates the best possible contact with the processor. The thermal pads, pre-cut by a CNC machine, ensure exceptional cooling of the voltage converters. The ease of installation is also not compromised; the pads can be removed without leaving any residue.

Planned modifications:

• Vertical connection terminal (Plexiglass®GS, Acetal)

Only selected materials from well-known manufacturers such as EVONIK, whose original Plexiglas® GS we use, are used. Even the metals, such as the high-purity copper, come from renowned brand manufacturers.

The production is carried out with the greatest care on our ultra-modern CNC machine park in Waren. Many work steps are carried out by hand and each product is brought to perfection according to the four-eye principle.

Technical data:
Material base plate: Nickel-plated electrolytic copper
Material cover: Acetal
Material connection terminal: Acetal   
Dimensions: (LxWxH): 270 x 128 (incl. terminal) x 28.5mm (incl. backplate)
Connection: 4x G ¼ inch (DIN ISO 228-1)
Weight: 1.2kg
Released up to 1 bar

Compatibility: 
AMD Radeon RX 6800, 6800XT 6900XT in reference layout