Details
This low profile network tool is a cable stripper and a punch down tool in one. It strips twisted-pair UTP and STP data cables and terminates wires into 110 blocks and the modular jacks used for RJ45 network and RJ11 phone wiring. It works with Cat5, Cat5e and Cat6 data cable. The yellow plastic body holds a high quality steel blade.
Properties
- Type
- Cable stripper and punch down tool
- Cable
- Twisted-pair UTP/STP, Cat5, Cat5e, Cat6
- Use
- Strip cable jackets, punch down wires into 110 blocks and keystone jacks
- Body
- Yellow plastic
- Pieces in the pack
- 1
Strip the jacket
Lay the cable in the stripping slot, close the hinged jaw with your finger in the ring and turn the tool once around the cable. The blade cuts through the outer jacket only, and the jacket slides off without nicking the twisted pairs underneath.
Punch down the wires
The forked blade at the end of the tool presses each wire down into the slots of a 110 block, a patch panel or a keystone jack. It is easy and safe to use for punching down wires on modular connectors.
Small and light
The low profile plastic tool fits in a pocket or a network toolbox, and the finger ring gives control when you strip a cable.
Technical data
| Part number | 8PK-CT001 |
| Type | Cable stripper and punch down tool |
| Cables | Twisted-pair UTP and STP data cable, Cat5, Cat5e, Cat6 |
| Termination | 110 blocks, modular jacks (RJ45 network, RJ11 phone) |
| Body | Plastic |
| Blade | Steel |
| Color | Yellow |
Notes
- The picture shows two tools. Each order quantity is one tool.
In the box
- 1x Cable Wire Stripper Punch Down Tool
