Details
This premium ultra thin PVC dust filter material lets you make your own dust filters for case fans, intakes and vents. The black sheet is only 0.22 mm thick and is perforated with 0.8 mm holes. Each quantity ordered is a 29.5 cm x 30 cm piece that you can cut to any shape.
Properties
- Type
- Dust filter sheet, cut to size
- Material
- PVC
- Thickness
- 0.22 mm
- Hole size
- 0.8 mm
- Sheet size
- 29.5 cm x 30 cm per quantity
- Color
- Black
Make your own filters
Cut the sheet with scissors or a hobby knife to fit a fan, an intake, a side panel vent or the front of a radiator. Fix it with magnets, double sided tape or under the fan screws, or use it to replace a damaged filter.
Ultra thin
At 0.22 mm the sheet is thin enough to sit between a fan and a panel or radiator without adding noticeable thickness.
Fine holes
The even pattern of 0.8 mm holes stops dust while air passes through. The black sheet blends in with a dark case.
Technical data
| Part number | PVCM-30 |
| Material | PVC |
| Thickness | 0.22 mm |
| Hole size | 0.8 mm |
| Size per quantity | 29.5 cm x 30 cm |
| Color | Black |
Notes
- Each quantity ordered equals one 29.5 cm x 30 cm piece.
- Any dust filter adds some resistance to the airflow. Clean the filter regularly; a clogged filter lets less air through.
In the box
- 1x 29.5cm x 30cm piece of Premium Ultra Thin 0.22mm PVC Case/Fan Dust Filter Material
