Details
The MB-SSW-KIT is a 36 piece motherboard mounting kit: 12 standoffs, 12 screws and 12 washers, all for M3 thread. It has the hardware to mount a motherboard in a case, with spares to replace lost or worn parts.
Properties
- Type
- Motherboard mounting kit
- Thread
- M3
- Contents
- 12 standoffs, 12 screws, 12 washers
- Pieces in the pack
- 36
What is in the kit
- 12 brass-colored hex standoffs with a male thread on one end and a female thread on the other
- 12 silver screws with a flanged head and Phillips drive
- 12 red washers that go between the screw head and the motherboard
How it goes together
Screw the standoffs into the case tray where your motherboard has mounting holes, lay the board on them, put a washer on each hole and fasten the board with the screws. The standoffs keep the back of the board clear of the metal tray.
Check the thread of your case
All parts in this kit use M3 thread. Many cases use 6-32 thread for the standoff holes instead, so check the thread of your case tray before you order.
Technical data
| Part number | MB-SSW-KIT |
| Thread | M3 |
| Standoffs | 12, brass-colored hex |
| Screws | 12, silver, flanged Phillips head |
| Washers | 12, red |
| Total pieces | 36 |
In the box
- 12x M3 Motherboard Standoff
- 12x M3 Motherboard Screw
- 12x M3 Motherboard Washer
