Details
Every product sold by ModMyMods is brand new and sold as it is received from the manufacturer, but not every product leaves its manufacturer perfectly clean. While rarely a major issue, some parts keep residue from the manufacturing process even after they are packed and sealed, so a rinse before installation is never a bad idea. With this add-on, ModMyMods does it for you.
Properties
- Service
- Flush of a product in your order with Ultra Pure Water
- Water
- Ultra Pure Water, under 0.05 ppm
- Flush
- 10 min: 5 min continuous in each direction
- Connection
- G1/4 water cooling hardware
- Includes
- Quality Assurance Pressure Testing
- Quantity
- 1 per product to be flushed
Ultra Pure Water from the ModWater production
For its in-house production of ModWater coolant, ModMyMods runs a pressure regulated Ultra Pure Water system that connects to G1/4 water cooling hardware. It runs a continuous stream of Ultra Pure Water with less than 0.05 ppm through a radiator, water block or any other part for an extended period.
The flush
The service is a 10 minute flush with the Ultra Pure Water system, 5 minutes continuous in each direction, so loose debris is removed and the part is prepped for your loop. It works for all water cooling components and is most recommended for radiators and water blocks. Radiators are the components most likely to hold contaminants, and for them ModMyMods offers the more thorough Advanced Radiator Prep Add-on Service.
How to order
Specify the product you would like flushed in the field on this page, and add 1 quantity of this add-on service for each item you wish to have flushed.
Notes
- The Pure Water Flushing Add-on Service includes the Quality Assurance Pressure Testing service as part of the process. Product add-on services are not intended to be purchased together.
In the box
- 1x Your ordered product, flushed with Ultra Pure Water and pressure tested
Additional Information
| Manufacturer | ModMyMods |
|---|
