Details
This professional Molex crimping tool (SN-28B) crimps Molex, fan and standard ATX power connector pins onto wires from AWG 28 to 16. It crimps both the male and female versions of the ModMyMods crimp pins, so you can build custom cables to your exact lengths. The ratcheting action gives the same crimp every time.
Properties
- Type
- Ratcheting crimping tool
- Model
- SN-28B
- Wire size
- AWG 28 to 16
- For
- Molex, fan and standard ATX power connector pins, male and female
- Color
- Black / Blue
- Pieces in the pack
- 1
For custom PC cables
Building your own cables means crimping new terminals onto cut wires. This tool handles the pins used on 4-pin Molex, fan and standard ATX power connectors.
Ratcheting action
The ratchet holds the jaws until the crimp is fully closed and only then releases. That gives consistent, complete crimps from the first pin to the last and makes long cable jobs less tiring.
AWG 28 to 16
The jaws take wires from thin AWG 28 signal wire up to AWG 16 power wire, which covers the wire sizes used in PC power and fan cables.
Technical data
| Model | SN-28B |
| Type | Ratcheting crimping tool |
| Wire size | AWG 28 to 16 |
| Terminals | Molex, fan and ATX power pins, male and female |
| Color | Black / Blue |
Notes
- Match the jaw opening to the wire size and strip only as much insulation as the terminal needs; a crimp on insulation will not hold.
In the box
- 1x Professional Molex Crimping Tool - AWG 28 to 16
