Details
ModWater PC Coolant Clear is a ready-to-use coolant made for PC water cooling, made and bottled by ModMyMods in Rochester, New York. It is low conductivity, reverse osmosis deionized water with ethylene glycol and a blend of additives for corrosion protection. It is not UV reactive. This listing is the 19 liter container.
Properties
- Type
- Ready-to-use PC coolant
- Color
- Clear
- UV reactive
- No
- Volume
- 19 liter
- Freeze protection
- Down to -5 °C (23 °F)
- pH
- 6 to 8 (neutral)
- Made in
- Rochester, NY, USA
Made for PC water cooling
ModWater is a coolant designed for PC water cooling loops. Pumps move it through your water blocks, radiators and all-in-one units, where it carries away the heat of the components. It starts with water purified in the ModMyMods in-house purification and deionization system. Every batch is hand tested for low conductivity, and ModWater is guaranteed at the time of bottling to never exceed 0.05 ppm (parts per million) of total dissolved solids.
Corrosion protection, PETG compatible
A blend of additives gives the coolant anti-corrosion properties, so it stays clear and protects the parts of your loop from degrading over time. The label states that ModWater protects all metals used in current cooling systems and is compatible with PETG hard tubing. The coolant is designed for long-term use in your PC.
Freeze protection and neutral pH
ModWater is made with ethylene glycol, which gives anti-freeze protection down to -5 °C (23 °F). The pH is neutral, between 6 and 8.
Colors and sizes
ModWater PC Coolant comes in Clear, Clear UV, Red UV, Green UV, Blue UV and Purple UV in 1 liter bottles, and in Clear in a 19 liter container with a spigot for system builders and larger jobs. The UV versions glow under UV light, for example under UV LED strips or a UV lamp. This listing is Clear in the 19 liter container.
Filling and storage
- Step 1: clean and flush the system. Residual contaminants, chemicals or sediments in the loop will keep the coolant from giving its best results.
- Step 2: remove the safety seal.
- Step 3: fill the coolant into the system.
- Use ModWater on its own: do not mix it with other concentrates, dyes, additives or liquids.
- Store the container tightly closed in a cool, dry place out of the reach of children and animals. The shelf life is 3 years from the "Bottled On" stamp on the front.
Technical data
| Product | ModWater PC Coolant |
| Color | Clear |
| UV reactive | No |
| Volume | 19 liter |
| Container | Translucent 19 liter container with a 1/2" spigot for easy dispensing |
| Base | Reverse osmosis deionized water with ethylene glycol (under 8%) |
| Total dissolved solids | 0.05 ppm maximum at bottling |
| Freeze protection | Down to -5 °C (23 °F) |
| Boiling point | 100 °C |
| pH | 6 to 8 |
| Tubing | PETG compatible |
| Shelf life | 3 years from the "Bottled On" date |
| Made in | Rochester, NY, USA |
Notes
- Do not use ModWater PC Coolant if copper or nickel-plated copper parts and aluminum parts are in the same cooling loop. If you have a mixed metal setup, ModMyMods can make the correct coolant for you: contact [email protected]. Sub-zero coolant is also available on request.
- ModWater is not a drink and must not be swallowed. Keep it out of the reach of children and pets. Skin and eye irritation is possible: on skin contact rinse the area with water and pat it dry; on eye contact flush the eyes with water for 10 minutes and get medical attention.
- Hardware Asylum reviewed ModWater coolant: read the review.
In the box
- 1x ModMyMods ModWater PC Coolant - Clear - 19 Liter
The safety data sheet is a PDF.
