Details
This small male to male connector turns a female 5-pin RGBW plug into a male one. It holds five pins in a black plastic carrier, with straight pins on both sides: push one side into a female RGBW connector and the other side becomes a male plug, without cutting, crimping or soldering, and without any permanent change to the cable.
Properties
- Type
- 5-pin RGBW male to male connector
- Pins
- 5
- Fits
- 5-pin female RGBW connectors
- Pieces in the pack
- 1
Join two female ends
Many RGBW cables, LED strips, fans and splitters end in a female connector, and so do the ModMyMods extension and splitter cables. Put this connector between two female ends to join them, for example to connect a lighting part with a female plug to a female extension or splitter cable.
Nothing permanent
The connector only pushes in. Pull it out again and the cable is back to its original female end.
Compatibility
The connector fits the 5-pin RGBW connection (red, green, blue and a separate white channel) used by RGBW controllers, RGBW LED strips and motherboards with a 5-pin RGBW header.
Part of a matched set
ModMyMods makes 5-pin RGBW extension cables in 50 cm and 1 m, 2-way, 3-way and 4-way splitter cables and a male to male connector, all in black with the same connectors, so they can be combined in one build.
Technical data
| Part number | MOD-0260 |
| Type | 5-pin RGBW male to male connector |
| Pins | 5 |
| Pins on both sides | Straight |
Notes
- Line up the arrow marks of both female connectors when you join them, so each line meets its partner.
- 5-pin RGBW, 4-pin RGB and 3-pin addressable RGB (ARGB) connections are different systems; plug 5-pin RGBW parts only into 5-pin RGBW headers.
In the box
- 1x ModMyMods Male to Male RGBW Connector
