Details
The ModMyMods M4 x 10mm Socket Head Cap Screw - Stainless Steel - Black is an M4 x 10 mm socket head cap screw made of stainless steel with a black finish. The tall round head has a hex socket for a hex key, and the knurled side gives your fingers a grip for the first turns.
Properties
- Type
- Socket head cap screw
- Thread
- M4 x 0.7
- Length
- 10 mm
- Drive
- Hex socket
- Material
- Stainless steel, black finish
- Color
- Black
- Pieces in the pack
- 1
Small parts around the loop
Short screws like this one hold the parts around a loop: radiator grills and faceplates, pump mounts, waterblock brackets, acrylic windows and your own fabricated parts. A socket head cap screw also looks tidy where the head stays visible.
Hex socket drive
The hex socket takes a hex key, which grips the screw firmly, so the tool does not slip out and the head does not get chewed up when you tighten it. That makes clean work easy, even in tight spots.
Check thread and depth first
Radiators and other parts use different threads (M3, M4 and 6-32 are the common ones) and different usable thread depths. Check what your part takes before you choose a size. On a radiator, a screw that is too long can reach the core and puncture a water channel, so always make sure the screw stops short of the fins.
Black finish
The stainless steel screw has a black finish that blends in with black fans, radiators and case parts.
Technical data
| Thread | M4 x 0.7 |
| Length | 10 mm |
| Head | Socket head cap, hex socket drive |
| Material | Stainless steel, black finish |
| Color | Black |
Notes
- This listing is for one piece. Add the quantity you need to the cart.
- ModMyMods socket head cap screws come in M3 x 8 mm stainless steel and M4 x 10 mm black stainless steel.
In the box
- 1x ModMyMods M4 x 10mm Socket Head Cap Screw - Stainless Steel - Black
