Details
The ModMyMods Fan / JST / SL Pin Extractor Tool removes the terminals from fan, JST and SL connectors without damaging them, so you can re-pin fan cables, shorten lighting leads or sleeve small cables. It is made in Rochester, NY, USA.
Properties
- Type
- Pin extractor tool
- For
- Fan, JST and SL connectors
- Tip
- Single narrow blade
- Handle
- Metal, engraved "Fan / JST / SL" and "ModMyMods"
- Made in
- Rochester, NY, USA
- Pieces in the pack
- 1
For fan, JST and SL terminals
Fan connectors and the small JST and SL connectors used for lighting and fan cables hold each terminal with a tiny latch. The narrow tip of this tool reaches into the connector and presses the latch, so the terminal comes out undamaged and can go back into a connector.
How to use it
Push the wire gently toward the connector, slide the tip into the connector next to the terminal until it presses the latch, then pull the wire lightly to take the terminal out. If it does not come loose, do not force it; take the tool out and try again.
Compact metal tool
The steel tip is fixed to a flat metal handle that is engraved with the connector type on one side and the ModMyMods name on the other, so you always pick the right tool from the drawer. The tool is small and light enough to keep in any toolkit.
Part of the sleeving tool kit
This tool is also part of the ModMyMods Pin Extractor PC Sleeving Tool Kit with the ATX / Mini-Fit Jr, ATX3.0 / 12VHPWR and dual ended Molex tools.
Technical data
| Part number | MOD-0319 |
| Type | Pin extractor tool |
| Connectors | Fan, JST, SL |
| Made in | Rochester, NY, USA |
In the box
- 1x ModMyMods Fan / JST / SL Pin Extractor Tool
