ModMyMods Copper and PETG Tube Cutter - Metal - Red (MOD-0209)

This tube cutter makes clean cuts in copper and PETG tube. It has a solid red metal body with a cutting wheel and two guide rollers, and a knurled black knob that feeds the wheel into the tube. The print on the body gives its range: 3 to 22 mm, 1/8" to 7/8" OD.

Properties

Type

Rotary tube cutter

For

Copper and PETG tube

Tube size

3 to 22 mm (1/8" to 7/8") OD

Body

Metal

Color

Red

Pieces in the pack

1

Clean, square cuts

A saw leaves burrs and a slanted end on copper and PETG tube. The cutting wheel of this cutter scores its way around the tube instead, so the end comes out square and clean and seals well in a hard tube fitting.

How to use it

Open the cutter with the knob, lay the tube against the two rollers and close the knob until the wheel touches the tube at your mark. Turn the cutter around the tube, tighten the knob a little after every turn or two, and keep going until the tube parts. Deburr the inside edge before you fit the tube.

Compact size

The small body fits around a tube even close to a wall or other parts, and the knurled knob turns easily with your fingers.

Technical data

Notes

• This cutter works with copper and PETG tube only. Acrylic tube will crack in it; cut acrylic tube with a saw.

In the box

• 1x ModMyMods Copper and PETG Tube Cutter - Metal - Red