Details
The ModMyMods 1800 Watt heat gun is a useful addition to any modder's tools. It has two airflow settings of 250 and 550 L/min and a temperature range of 60 to 650 °C, enough for heatshrink on custom cables, bending hard acrylic tubing and heat treating vinyl appliques.
Properties
- Type
- Heat gun, variable temperature
- Power
- 1800 W
- Airflow
- 250 and 550 L/min
- Temperature
- 60 to 650 °C
- Color
- Blue
- Pieces in the pack
- 1 heat gun, 1 nozzle, 1 manual
Made for modding
Use it to shrink heatshrink tubing on custom cables and sleeving, to warm hard acrylic tubing until it can be bent, and to heat treat vinyl appliques and wrap film so they follow curves and edges.
Two airflow settings
The red rocker switch on the handle turns the gun off (0) and selects the two airflow settings (I and II): 250 L/min for gentle, precise work and 550 L/min to heat larger parts quickly.
Variable temperature
The dial at the back of the gun, marked HI and LO, sets the temperature between 60 and 650 °C. Use the lower end for heatshrink and vinyl, and more heat only where the material needs it.
Air reduction nozzle
The included air reduction nozzle fits on the outlet and narrows the hot air stream, so you can heat one heatshrink sleeve or one bend without warming everything around it.
Technical data
| Part number | MOD-0082 |
| Type | Heat gun |
| Power | 1800 W |
| Airflow settings | 250 L/min | 550 L/min |
| Temperature range | 60 to 650 °C |
| Controls | Rocker switch 0 / I / II, rear temperature dial HI / LO |
| Color | Blue |
Notes
- The nozzle and the air stream get very hot. Never point the gun at people or animals, and let the nozzle cool on a heat-proof surface before you put the gun away.
- Read the included instruction manual before first use.
In the box
- 1x ModMyMods Heat Gun
- 1x Air Reduction Nozzle
- 1x Instruction Manual
