Details
This black 140mm ultra thin PVC fan dust filter keeps dust and debris out of your PC while the air keeps flowing. The perforated PVC sheet is just 0.45mm thin and has a mounting hole in each corner, so it fits under the fan screws of a 140mm fan.
Properties
- Type
- Fan dust filter
- Fan size
- 140mm
- Thickness
- 0.45mm
- Material
- Perforated PVC
- Color
- Black
- Pieces in the pack
- 1
Less dust inside
Intake fans pull dust into the case, where it settles on heatsinks, radiators and fan blades. A filter on the intake catches it at the fan, where it is easy to see and clean.
Ultra thin for airflow
At just 0.45mm the filter adds almost no thickness and lets the fan keep its airflow while it holds back dust particles and other debris.
Mounts with the fan screws
The square filter has a hole in each corner. Place it on the intake side of the fan and run the fan screws through the holes.
Five sizes
The ModMyMods 0.45mm fan dust filter comes in 40mm, 50mm, 80mm, 120mm and 140mm sizes. This listing is the 140mm filter.
Technical data
| Part number | MOD-0366 |
| Type | Fan dust filter |
| Fan size | 140mm |
| Thickness | 0.45mm |
| Material | Perforated PVC |
| Mounting | Four corner holes |
| Color | Black |
Notes
- Clean the filter from time to time; a filter full of dust restricts the airflow. Take it off and blow it out or rinse it with water, then let it dry before you mount it again.
- For custom shapes, the white 0.22mm PVC dust filter material is sold as a sheet you can cut to size.
In the box
- 1x 140mm Ultra Thin 0.45mm PVC Fan Dust Filter - Black
